Scanning for channels

If you conducted an initial automatic channel scan during the setup of your ADTH NextGen TV Box but need to perform another scan, follow these steps:

Auto Scan:

1. In the program guide, press the BACK button on the remote to open the sidebar.
2. Navigate to Settings > Auto Scan.
3. Select your country (Currently only USA is available).
4. Press "Scan" to start the scanning process.
5. A success window will appear after scanning is complete.

Note: If you need to scan specific channels or frequencies, use the Manual Scan function.

Manual Scan:

1. Go to Settings > Manual Scan.
2. Enter the start and end frequencies (kHz) you want to scan.
3. Set the Bandwidth to 6000 kHz.
4. Choose the standard.
5. Press "Scan" to initiate.

Note:

Starting with version 1.0.98, the Manual Scan function now uses selectable options instead of manual frequency entry. Simply choose the desired range from the physical channel number list.

Add or Resetting Channels:

• Add to Existing Channels

Select this option to keep your current channels and add newly found channels to the list. This option is recommended if you do not want to lose previously scanned channels and only wish to search and add additional channels.

• Erase Existing Channels and Reset

Choose this option to delete all current channels and reset the channel list to include only newly scanned channels.