TV Power Button Infrared Learning Guide

The red TV power button on your ADTH remote can learn the infrared code from your existing TV remote, allowing you to control your TV's power easily. Follow these simple steps:

1. Enter Learning Mode
   Press and hold the red TV power button on your ADTH remote for 3 seconds. When you release the button, the red LED will stay on, indicating that the remote is now in "learning mode."

2. Teach the Code
   Hold your ADTH remote very close (less than 1 cm) to your TV remote, ensuring the infrared sensors are aligned. Press the power button on your TV remote. If the red LED on your ADTH remote blinks 3 times, the code has been successfully learned.
   

3. Clear the Learned Code
   To erase the learned code, press and hold the "VOL+" and "VOL-" buttons on your ADTH remote for 10 seconds. The red LED will blink 3 times, confirming that the infrared code has been cleared.