To get started with ADTH NextGen TV, here are some simple steps for you.
Hardware Setup
1. Connect the antenna to the antenna port on the box.
2. Connect the box to a power source using the accessory power adapter.
3. Connect the box to your TV or monitor via HDMI.
4. Connect the box to an Ethernet network (If you don't have an Ethernet network, you can also connect to WiFi later).
5. Please install two AAA batteries into the remote control and press the red TV button to turn on the box.
IMPORTANT: Please Update your Box Software thru the Internet (Ethernet or WIFI) before the first time use.
Software Setup
1. Please follow the on-screen instructions to pair the remote control.
2. Connect to an Ethernet or WiFi network. (important)
3. Select country and auto scan channels.
4. Optionally set PIN code and viewing ratings.
5. Download the most up-to-date software to enjoy watching all channels available.
6. Start watching TV
For more detailed instructions, please visit this link.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article